Princeton Concrete Lifting
Concrete Lifting in Princeton, TX: Foam & Mudjacking Slab Repair
Concrete lifting and leveling in Princeton, TX — foam injection, mudjacking, driveway and patio repair. Free estimates.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Princeton and nearby communities.
Get a free estimate
Tell us about the project and how to reach you.
Concrete Lifting
Concrete Lifting for Homes and Businesses in Princeton
Princeton is growing fast. A lot of the newer slabs around town were poured on graded fill soil that hasn't fully settled yet. That's why we get calls about driveways sinking on one side, garage floors dropping near the door, or patios pulling away from the house. Princeton Concrete Lifting fixes that by injecting material under the slab and raising it back to grade, without tearing anything out.
Collin County clay adds to the problem. It swells when wet and shrinks when dry, pushing and pulling on slab edges over time. We use foam injection or mudjacking depending on the slab and the void, and we walk you through which one fits before any drilling starts.
What we do
Concrete Lifting services
Concrete Lifting across Princeton and the surrounding area.
Residential Services
Foam Concrete Lifting
Foam concrete lifting in Princeton: polyurethane injection, same-day cure, driveway and patio leveling. Free estimates.
Learn more →
Mudjacking for Sunken Slabs
Slurry injection levels sunken driveways and slabs affordably. Free estimates, honest cost ranges.
Learn more →
Driveway Leveling
Driveway leveling in Princeton, TX for sunken panels and edge gaps. Foam or slurry injection, free estimates available.
Learn more →
Patio Leveling
Foam injection patio leveling for sunken slabs and trip edges. Free estimates, no full replacement needed.
Learn more →
Sidewalk Leveling
Panel-by-panel sidewalk leveling fixes trip hazards fast. Foam injection, free estimates, quick turnaround.
Learn more →
Slab Foundation Void-Fill Stabilization
Slab foundation void-fill stabilization in Princeton, TX for early settling issues. Deep injection, free estimates.
Learn more →
Garage Floor Leveling
Garage floor leveling in Princeton, TX without tear-out. Foam injection lifts sunken slabs in a single visit.
Learn more →
Pool Deck Leveling
Pool deck leveling in Princeton, TX without draining the pool. Foam injection lifts sunken deck panels flush with coping.
Learn more →
Commercial Services
Commercial Slab Leveling
Commercial slab leveling in Princeton, TX for retail, office, and industrial floors. Foam or slurry, free estimates.
Learn more →
Warehouse Floor Leveling
Warehouse floor leveling in Princeton, TX for forklift paths and racking areas. Slurry or foam injection, free estimates.
Learn more →
Parking Lot Concrete Repair
Parking lot concrete repair in Princeton, TX for sunken panels and trip hazards. Foam or slurry injection, free estimates.
Learn more →
Loading Dock Leveling
Loading dock leveling in Princeton, TX for uneven dock slabs and trailer gaps. Foam or slurry, free estimates.
Learn more →
Looking for something else? Browse all services in the menu, or tell us about a custom project.
Why choose us
Why choose Princeton Concrete Lifting
Two lifting methods, not one default
We choose foam or mudjacking based on your slab and soil, not whichever truck happens to be free that day.
Diagnosis before drilling
We check for a plumbing leak before assuming it's soil. Fixing the wrong cause just means calling again next year.
Written estimates, no surprise line items
You see square footage, void size, and method before we touch a drill.
Familiar with Collin County clay
Expansive clay soil behaves differently than sand or loam. We plan injection points around how it swells and shrinks.
Have a project in mind?
Get a Free EstimateHow it works
How our Concrete Lifting process works
Step 1Site visit and inspection
We walk the slab, check for leaks, and measure the height difference.
Step 2Method selection and plan
We recommend foam or mudjacking based on slab type and access.
- Step 3
Injection drilling
We drill small holes at marked points along the low edge.
Step 4Foam or slurry injection
Material is pumped under the slab to fill the void and lift it.
Step 5Height verification
We check the slab against adjacent panels while lifting.
Step 6Hole patching
Injection holes are sealed with a matching patch compound.
Ready to start?
Get a Free EstimateCost
Driveway Repair Princeton TX Cost
Pricing depends mostly on slab size, how deep the void runs, and which method fits. Here's the general range we see: Every job gets a free written estimate before we start. Call for a number specific to your slab.
| Project type | Typical range | What’s included |
|---|---|---|
| Sidewalk panel lift | $300–$800, | single panel, minor void. |
| Driveway or patio leveling | $600–$2,500, | depends on square footage and drop height. |
| Garage floor leveling | $800–$2,800, | interior slab with threshold matching. |
| Foundation void-fill stabilization | $2,000–$8,000, | deeper injection points and structural monitoring. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateMaterials
Foam Concrete Lifting Near Me: Materials and Methods We Use
Foam and slurry aren't interchangeable. Here's what we work with and why:
Two-part polyurethane foam
Expands within seconds of injection, adding almost no weight to the soil below. Good fit for driveways and patios where you don't want to overload an already soft base.
Cementitious slurry mix
A cement, soil, and sand blend pumped in larger volumes. Costs less per job on bigger slabs but takes longer to cure.
High-density structural foam
Denser formula built for foundation-level void fill, where the load is higher and the fix needs to hold long-term.
Quick-set patch material
Seals injection holes flush with the surrounding slab within the hour.
Injection port hardware
Small ports that control where material goes and let us monitor pressure as the slab rises.
Soil stabilization grout
Used for deep voids under expansive clay, filling gaps the standard slurry mix can't reach.
Questions on materials?
Get a Free EstimateTimeline
How long does a Concrete Lifting take?
Most jobs wrap up in a single visit. Here's roughly how the day breaks down: Foam gets you back on the driveway faster. Slurry costs less but asks for more patience.
- 01
Consult
same day - 02
Injection and lift
2–4 hours - 03
Cure before foam traffic
- 04
Cure before slurry traffic
24–48 hours
Need a schedule that fits?
Get a Free EstimateCodes & permits
Permits for Concrete Lifting in Princeton
Most lifting work is a repair, not new construction. Permits are the exception, not the rule. Check with Princeton or Collin County before starting if you're unsure. Rules can shift by parcel.
| Typically needs a permit | Often no permit |
|---|---|
| Structural foundation void-fill stabilization | Driveway panel leveling |
| Sidewalk work in the public right-of-way | Patio leveling |
| — | Garage floor leveling |
| — | Sidewalk panel touch-ups on private property |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY Mudjacking Kits vs Hiring a Pro in Princeton, TX
| DIY | Hire a pro |
|---|---|
| Fine for small cosmetic gaps under a walkway stone | Deep voids need pressure monitoring most kits don't offer |
| Works on low-traffic, low-load areas | Structural slabs and foundation edges shouldn't be a first attempt |
| Box-store foam kits are cheap for a quick patch | Multi-point lifts require watching several injection sites rise evenly at once |
Not sure DIY vs pro?
Get a Free EstimateWhen to call
When to Call for Concrete Lifting
Call (325) 312-5749 or request a free estimate if any of that sounds familiar.
- A trip hazard forming at a driveway or sidewalk seam
- A gap widening under a slab edge after rain
- A door sticking near a patio that used to close fine
- Water pooling toward the house instead of away from it
Seeing warning signs?
Get a Free EstimateWhere we work
Serving Princeton and nearby communities
Local pages for these communities. Nearby towns without a page are still in our service area.
Also serving
Fairview · Melissa · McKinney · and others
Outside these locations?
Before & after
See the work up close
Before 
After
Customer feedback
What local customers say
Margaret J.
4 weeks ago
5 out of 5 starsHonestly did not expect such a professional team. They showed up on time, explained every step, and the concrete lifting turned out better than I pictured.
Princeton, TX
Ryan V.
2 weeks ago
5 out of 5 starsCalled Princeton Concrete Lifting after a neighbor tip in Princeton. Super easy to deal with — clear answers, no runaround, and they actually cared about the details on our driveway leveling.
Old Town Princeton, TX
Joshua F.
2 days ago
5 out of 5 starsPrice was way more affordable than the other quotes we got for mudjacking for sunken slabs. Still felt premium — clean jobsite, solid finish, and I'd hire them again without thinking twice.
Providence Village, TX
Common questions
Concrete Lifting FAQs
How much does Concrete Lifting cost in Princeton?
Most residential jobs run $400 to $3,000 depending on slab size, void depth, and method. Foundation void-fill work runs higher because of deeper injection points and more monitoring.
How long does Concrete Lifting take?
Most driveway or patio jobs finish in a few hours. Foam cures fast enough to drive on the same day. Mudjacking needs a longer cure before you load the slab.
Do I need a permit for Concrete Lifting?
Rarely. Repair work on an existing slab usually skips the permit process. Structural foundation stabilization is the exception, so check with the city if the work touches your foundation.
Is DIY Concrete Lifting a good idea?
For a small cosmetic gap under a stepping stone, maybe. For a driveway with a real void underneath, box kits rarely hold pressure long enough to fill it evenly.
When should I call a Concrete Lifting pro?
Call when you see a trip hazard, a widening gap at a slab edge, or water pooling toward the house instead of away from it.
What affects Concrete Lifting pricing?
Slab size, void depth, number of injection points, and which material we use. Foam costs more per unit but often needs less volume than slurry.
What is typically included in Concrete Lifting?
Inspection, drilling, injection material, lift verification, and hole patching. Larger jobs may include soil stabilization grout for deeper voids.
How do I prepare my home for Concrete Lifting?
Clear furniture or planters off the slab and move vehicles out of the driveway. That's usually all we need.
Ready for a clear estimate?
Tell us about the project, or call to talk through options in Princeton.