Princeton Concrete Lifting logoPrinceton Concrete LiftingPrinceton, TX
Mudjacking photo

Princeton Concrete Lifting

Mudjacking for Sunken Slabs in Princeton, TX

Slurry injection levels sunken driveways and slabs affordably. Free estimates, honest cost ranges.

  • 15+ Years local experience
  • 500+ Projects completed
  • Licensed & Insured

Serving Princeton and nearby communities.

Is mudjacking cheaper than tearing out and replacing a slab? Usually, yes, and by a wide margin.

Mudjacking pumps a cement-based slurry beneath a sunken slab, raising it back to level without removing a single piece of concrete. Princeton Concrete Lifting still uses this method on larger driveways and thicker slabs where the added weight of slurry isn't a liability, and where the job calls for a budget-friendly fix over a full foam system.

What's included

What's Included with Mudjacking for Sunken Slabs

Typically included: Optional: Customer prep: Is mudjacking cheaper than replacing a slab? The material and labor cost is a fraction of a full tear-out and repour, since there's no demolition or disposal involved.

  • Drilling pattern mapped across the low section of the slab
  • Slurry pumped through each hole in stages
  • Lift monitored continuously to avoid over-raising
  • Patch finish applied to match the surrounding concrete
  • Joint sealing after the lift to limit future water entry
  • Additional drill points for larger or oddly shaped slabs
  • Move vehicles and outdoor furniture off the slab beforehand
  • Flag sprinkler lines or buried utilities near the work zone

How it works

How Our Mudjacking Process Works

  1. Drilling access holes photo
    Step 1

    Drill pattern

    Holes spaced across the sunken section, about a foot apart.

  2. Concrete Lifting Pumping mud mix photo
    Step 2

    Slurry pump

    Cement, sand, and soil mix pumped in through each hole.

  3. Patch and seal photo
    Step 3

    Lift check

    Slab height measured against adjacent panels as it rises.

  4. Cure time photo
    Step 4

    Cure time

    Slurry allowed to firm before traffic resumes.

FAQs

Mudjacking for Sunken Slabs FAQs

Is mudjacking cheaper than replacing a slab?

Almost always. Replacement means demo, disposal, forming, and a new pour. Mudjacking skips all of that and works with the slab you already have.

Is polyurethane foam better than mudjacking for clay soil?

Foam adds less weight, which matters on softer or more reactive soil. Mudjacking still holds up well on thicker, larger slabs like extended driveways where the extra weight isn't a concern.

How much does it cost to fix a sunken sidewalk panel?

A single panel typically runs on the lower end of our pricing, since it needs fewer drill points and less slurry than a full driveway.

Will lifting the slab cause new cracks?

Slurry injection raises the slab gradually across multiple points, which limits new stress. It won't repair existing cracks, but it shouldn't create fresh ones when done correctly.

Before & after

Before and After Mudjacking Results

  • Mudjacking for Sunken Slabs photo
    Before
  • Mudjacking for Sunken Slabs photo
    After

Timeline

How Long Does a Mudjacking Take?

Most residential mudjacking jobs wrap in a single visit, though cure time runs longer than foam. Foam Concrete Lifting is worth comparing if you want a faster return to full use.

  1. 01

    Consult and mark-up

    same day
  2. 02

    Drilling and injection

    2–4 hours
  3. 03

    Cure before foot traffic

    several hours

  4. 04

    Cure before vehicle traffic

    24 hours

Need a schedule that fits?

Get a Free Estimate

Next step

Get a Mudjacking Estimate in Princeton

Call Princeton Concrete Lifting at (325) 312-5749, or send us photos of the sunken area and we'll put together a free estimate.

Home | Contact

Ask about Mudjacking for Sunken Slabs

Tell us about the project and how to reach you.

Call (325) 312-5749